5 PIECE TOOL KIT HK416 417 MR HAUS 🇺🇸🇨🇦

We use Canadian Pro official game pucks that are designed, manufactured and printed in Canada. We set the price low because we think this is an indispensable tool that anyone who works on firearms should have on their workbench.

There are many uses for these armorer’s pucks but they’re most commonly used to provide a solid backing surface for installing and removing roll pins from firearms, hence the hole in the center of the puck.

Common uses include: Gas block pins, bayonet lug pins, trigger guard pins, bolt catch pins and front sight mount pins

🇨🇦 Designed, Manufactured and Printed in Canada

🇺🇸 Made in USA

• When installing a bushing apply a drop of Rocksett or high temperature Loctite and snug it up, do not over tighten your bushing, there is no need to exceed 15 inch pounds of torque.

WARNING! IF YOU INTEND TO USE THIS TOOL TO REMOVE A BUSHING FROM A FACTORY HK UPPER RECEIVER BE AWARE THAT THE BUSHINGS ARE INSTALLED BY HK USING A “ROCKSETT LIKE” PRODUCT AND YOU RISK DAMAGING YOUR BUSHING AND YOUR TOOL IF YOU DO NOT TAKE STEPS TO DISSOLVE THE FACTORY INSTALLED THREAD LOCKER BEFORE ATTEMPTING TO REMOVE A BUSHING WITH THIS TOOL.

HANDGUARD LOCKING BOLT DRIVER BIT

This bit was designed specifically to fit the inner “plus sign” feature in the original HK416 and HK417 handguard locking bolt.

Drive compatibility – 1/4″ bit driver

Length – 1.25″

Material – These bits are made from heat treated 17-4 stainless steel and they’re magnetic so they won’t fall out of your bit driver.

Compatibility – Genuine Heckler & Koch handguards for early model HK416, HK417 and all Geissele SMR HK handguards.

• Bits only, bolt is not included.

🇺🇸 Made In USA

TAKEDOWN PIN | BUFFER RETAINER | MULTI-TOOL | TAC SPIKE  AND MINI MULTI-TOOL

This handy little tool was designed specifically for the locking style takedown and pivot pins used in the HK MR556 and MR 762 rifles, but it works very well for most takedown pins and pushpins like the ones found in the MP5, SP5, G36, SL8, UMP, MP7 etc.

At approximately 5 1/4 x 3/8″ this tool is about the size of a ball point pen so it’s right at home in the pen holder on your desk and great to have on your work bench, in your rifle bags, vehicles, tool rolls etc. The handle of the tool features Diamond-Pattern Knurling for a good grip and they’re made from Acetal so they won’t scratch your receiver.

Simply insert the tool into your HK MR Pivot or Takedown Pin, push to depress the spring loaded detent and the pin will unlock.

This tool also works very well to depress the Buffer Retainer for installation or to remove the recoil buffer and spring from your HK416, 417 or MR rifle.

In an emergency situation you have a pen sized tactical spike that could be a very effective Self Defense Tool.

Full Size Tool Specs:

Material – Acteal (Polyoxymethylene or POM) is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Length – 5.29″

Width – 3/8″

Mini Tool Specs:

Length – 3.5″

Width – 3/8″

Common Uses:

• Pivot and takedown pin removal on HK MR Series rifles
• Buffer retainer installation and removal
• Recoil spring installation and removal
• Rear lug leaf spring installation and removal
• Prying out firing pin retaining pin on HK416 and 417 bolt carriers
• Pushing out firing pin retaining pin on HK416 A3, HK416 A5, M27 IAR, MR556, SDMR, G28 and MR762 bolt carriers
• A5 gas block adjustment
• Tactical Spike for Self Defense

🇺🇸 Made In USA